Post by account_disabled on Dec 30, 2023 1:44:43 GMT -5
The Department of Foreign Trade revealed that the European Union has revised the chemical requirements for the use of aluminum and formaldehyde in new toys more stringently. To create safety for children There are many types of products that are affected. It is recommended that manufacturers and exporters study and adjust to prevent it from becoming an obstacle to exports. It is stated that it will come into force this coming May. Mr. Keerati Ratchano, Director-General of the Department of Foreign Trade, revealed that the European Union has issued Directive (EU) 2019/1922 and Directive (EU) 2019/1929 to add and amend trade regulations. Chemistry of the EU Regulation on Safety of Aluminum and Formaldehyde in Toys Annex II Directive 2009/48/EC of the European Parliament and of the Council on the safety of toys, which is based on the recommendations of the Council.
Education Science Committee, Toxicity, Biological Toxicity Industry Email List and environment There are limits to the amount of chemicals that children can take in each day. Both regulations will come into effect from 20 May 2020 and 21 May 2020, respectively. For updated details. Specify aluminum in dry, brittle, powder-like toys or flexible toy materials not to exceed 2,250 mg/kg, such as chalk, crayons, magic sand. Molecular models, compounds and plasticine, etc., liquid toys or toys that are sticky not more than 560 mg/kg, such as fun soap bubbles, finger paints, liquid glue, poster paint, etc., and toy materials that can be rubbed off do not. More than 28,130 mg/kg, such as ceramics, glass, alloys, textiles and wood, substances with flexible properties like natural rubber. polymers and coatings, etc. As for formaldehyde Set new details: 1. Limit the diffusion value to no more than 1.5 mg/l in polymeric toy materials.
2. Limit the release value to no more than 0.1 ml/m in wooden toys that Contains resin as a connector (in resin-bonded wood toy material) 3.Limit the capacity value not to exceed 30 mg/kg in textile toys (in textile toy material) 4.Limit the capacity value not to exceed 30 mg/kg. kg in leather toys (in leather toy material) 5. Limit the capacity value not to exceed 30 mg/kg in paper toys (in paper toy material) and 6. Limit the capacity value not to exceed 10 mg/kg in toys. that has water as the main component (in water-based toy material) from export statistics data Thailand has the value of exporting toys to the world market, coordinates 9503, in 2016-2018, valued at 7,453.80, 6,812.10, and 7,171.50 million baht, respectively, and during the 10 months of 2019 (Jan.-Oct.) there was an export Products in this group went to the world market with a value of 6,478.90 million baht, an increase of 9.57% compared to the same period last year. However, in order to prepare to be able to comply with this law without being an obstacle to Thai trade, entrepreneurs, export and related agencies.
Education Science Committee, Toxicity, Biological Toxicity Industry Email List and environment There are limits to the amount of chemicals that children can take in each day. Both regulations will come into effect from 20 May 2020 and 21 May 2020, respectively. For updated details. Specify aluminum in dry, brittle, powder-like toys or flexible toy materials not to exceed 2,250 mg/kg, such as chalk, crayons, magic sand. Molecular models, compounds and plasticine, etc., liquid toys or toys that are sticky not more than 560 mg/kg, such as fun soap bubbles, finger paints, liquid glue, poster paint, etc., and toy materials that can be rubbed off do not. More than 28,130 mg/kg, such as ceramics, glass, alloys, textiles and wood, substances with flexible properties like natural rubber. polymers and coatings, etc. As for formaldehyde Set new details: 1. Limit the diffusion value to no more than 1.5 mg/l in polymeric toy materials.
2. Limit the release value to no more than 0.1 ml/m in wooden toys that Contains resin as a connector (in resin-bonded wood toy material) 3.Limit the capacity value not to exceed 30 mg/kg in textile toys (in textile toy material) 4.Limit the capacity value not to exceed 30 mg/kg. kg in leather toys (in leather toy material) 5. Limit the capacity value not to exceed 30 mg/kg in paper toys (in paper toy material) and 6. Limit the capacity value not to exceed 10 mg/kg in toys. that has water as the main component (in water-based toy material) from export statistics data Thailand has the value of exporting toys to the world market, coordinates 9503, in 2016-2018, valued at 7,453.80, 6,812.10, and 7,171.50 million baht, respectively, and during the 10 months of 2019 (Jan.-Oct.) there was an export Products in this group went to the world market with a value of 6,478.90 million baht, an increase of 9.57% compared to the same period last year. However, in order to prepare to be able to comply with this law without being an obstacle to Thai trade, entrepreneurs, export and related agencies.
